Specifications

Color Inkjet Printer JV33-130/160
4-12
Expiration:1MONTH
MMCC - - - -
The expiration date of an ink
cartridge has passed (one
month has passed after the
specified expiration date).
The red LED blinks.
Replace the ink cartridge generating
the warning with a new one.
* The ink cartridge may be used until
two months pass after the specified
expiration date.
←
Expiration:2MONTH
MMCC - - - -
The expiration date of an ink
cartridge has passed (two
months have passed after the
specified expiration date).
Replace the ink cartridge generating
the warning with a new one.
←
INK REMAIN ZERO
MMCC - - - -
Remaining amount of ink in an
ink cartridge is zero.
Replace the ink cartridge generating
the warning with a new one.
←
!WASTE TANK
The waste ink tank is nearly
full.
Replace the waste ink tank with a new
one.
1. Make sure that [MAINTENANCE] -
[WasteInkWarning] is performed.
!Wash Liquid END
The washing solution car-
tridge is empty.
Replace the washing solution cartridge
with a new one.
1. Check that the cartridge end sensor
works properly with [#TEST] -
[WASH CARTRIDGE].
2. If it does not work properly, replace
the sensor or IO PCB with a new one.
!WashLiquidCart.NONE
The washing solution car-
tridge has not been installed.
Install the washing solution cartridge. 1. Check that the cartridge exist/non-
exist sensor works properly with
[#TEST] - [WASH CARTRIDGE].
2. If it does not work properly, replace
the sensor or IO PCB with a new one.
!WRONG WASH CART.
There is trouble with washing
solution cartridge.
Check the washing solution cartridge.
←
** Washing liquid **
** un-filling up. **
Washing solution has not been
supplied.
Supply the washing solution.
Execute [MAINTENANCE] -
[HD.MAINTENANCE] - [FILL UP
INK].
←
<Warning messages and corrective measures (continued) >
Display Cause
Remedy (instruction & maintenance manual)
Descriptions in the manual
(for reference)
Remedy