Specifications

Color Inkjet Printer JV33-130/160
4-2
4-1. Outline
This chapter describes the troubleshooting for JV33-130/160. Before starting work, read and understand
thoroughly the instructions given below and “1-1. Precautions in Maintenance” (p.1-2 ).
4-1-1. Rough identification of the source of the trouble
At the beginning of troubleshooting, it is necessary to identify the trouble roughly which functions the
trouble relates to.
Problems can be roughly classified into those that relate to the printer itself and those that involve the
connection between the printer and the host computer.
1. Problems with the printer itself
The cause of the trouble can be identified by executing appropriate functions or using test
functions.
2. Problems concerning the connection to the host computer
Hardware: Broken wire or faulty contact of cables
Software: Transmission by improper application setting
4-1-2. Checking procedure
In the standard setting of JV33-130/160, priority is given to the host computer.
Check the settings on the host computer to see if there is any improper parameter setting.
START
Rough identification of error source
Execute appropriate functions or use test
functions of JV33-130/160 (See p.2-52)
Refer to Precautions in
Maintenance (P.1-2 )
4-2. Troubles for which error messages are displayed (P.4-4 )
Troubles on the host computer side
If this troubleshooting cannot correct the trouble, check to see if the same trouble occurs
with another host computer (if possible).
Do the
above functions operate
normally?
No
Is there
error message?
Yes
No
Yes
Is the
trouble related to print
quality?
Yes
No