Specifications

Overhaul of Driving Parts
3-43
5 Remove the screws (x2), and remove the
wiper assembly from the base.
6 Release the clamp from the lower part of
the station, and remove the connector
that is directly connected to the wiper
motor.
7 Remove the wiper home position sensor
connector.
8 If you are replacing only the motor,
remove the wiper drive link and remove
the screws (x2) to remove the motor.
* When replacing the motor, create a gap of 0.5
mm between the motor and the base.
9 Reattach by reversing the removal pro-
cedure.
Wiper assembly
Wiper drive link