Specifications

Specifications of the main unit
1-5
1-3. Specifications of the main unit
 Basic Specifications of the Unit
Item
Specifications
Notice
JV33-130 JV33-160
Head On demand piezoelectric head (IH47V*1 head stagger array) Solvant capable head
Printing resolution 540, 720, 1440 dpi Variable dot capable
Print mode
(Scan x Feed)
720 x 540dpi VD:
540 or 720 x 720dpi VD :
540 x 900dpi VD :
540 or 720 x 1080dpi VD :
720 x 1440dpi VD :
1440 x 1440dpi :
In the following case, fewer nozzles
are used for printing due to memory
restrictions:
4-color : 1440 x 1440dpiVD
6-color : 720 x 1440dpiVD
1440 x 1440dpiALL
6-color + white : 540 x 1080dpi VD
720 x 1080dpi VD
720 x 1440dpi VD
1440 x 1440dpi ALL
Ink 6-color + white
loading
(SS21 ink only)
K • M • C • Y • Lc • Lm • W • W Total 8 IC chip mounted cartridges
6-color loading K • M • C • Y • Lc • Lm/K • M • BI • Y • LBI • Lm
4-color loading K • M • C • Y/K • M • BI • Y
Ink supply (4-color only)Supplying by 2 cartridges with toggle switching
(replacement of cartridges at printing is allowed)
Ink end is detected with the cartridge end board detection method.
Ink capacity 6-color + white
loading
White ;2 x 220 cc cartridges
Except for white:1 x 440 cc cartridge of each color
6-color loading 1 cartridges of 440cc for each color. 440cc/1color At 6-color, 880cc for only CM
4-color loading 2 cartridges of 440cc for each color. 880cc/1 color
Available media FF, Tarpaulin, Polyvinyl chloride film
(However, drying of the media must be allowed in the specified print
mode.)
Print quality confirmation media is
MIMAKI genuine.
Maximum
drawing range
At standard scan 1361 mm 1610 mm When left and right drawing margin is
set to the minimum.
Media specifica-
tion
Maximum width 1371 mm 1620 mm
Minimum width 210 mm
Thickness Less than 1.0 mm
Roll O.D. Less than ø180 mm
Roll weight Less than 25 kg
(In the range that feeding error caused by bending with its own weight
when both ends of the roll are held does not occur.)
Tube I.D. 2 inches, 3 inches
Drawing face Outside (over wrap)
End of winding Taping or weak pasting to the paper tube
Maximum
winding O.D.
ø180 mm or less
Print margin Roll Left and Right: 15 mm (default value)
Top : 40.0 mm
Bottom: 0.0 mm
Margin of left and right whose toler-
ance excluding meandering of media is
± 2mm can be changed.
Minimun 5mm
Leaf Left and Right : 15 mm (default value)
Top : 40.0 mm
Bottom : 98.5 mm
Distance accu-
racy
Precision ± 0.3 mm or ± 0.3% of specified distance, whichever larger Expansion and contraction of test
media, photo paper or gloss paper is
excluded. Meandering just after the
setting is excluded.
Repeatability ± 0.2 mm or ± 0.1% of specified distance, whichever larger