Specifications

Color Inkjet Printer JV33-130/160

3-30

Adjust X-Axis Motor Current

If there is a hunting noise when the motor is driven, adjust the power supply current to minimize the hunting

noise. Perform the supply current adjustment while the head is over the station, without moving the carriage out.

Select “X MOVING ADJUST” from the

operation menu in maintenance mode.

Input the following conditions and exe-

cute.

Input the following conditions.

Speed (S) : 5 ~ 10 mm/s

Acceleration (A) : 0.2 G

Length (X) : approx. 50 ~ 100 mm

Adjust the value to minimize the hunting noise when the X-axis motor is driven.

Check the noise of X-axis motor at the left back side of JV33.

* Input values with targeting 130~160.

(Input range 0~255)

Press [END] several times to finish the X-axis motor current adjustment.

Mainte-

nance mode

Power ON.

<LOCAL.1> [#01] FUNCTION

#ADJUST <ent>

[FUNC]

#MOTOR CURRENT

X MOVING ADJUST<ent>

#ADJUST

MOTOR CURRENT <ent>

#X MOVING ADJ.

S=*** A=*** X=****

X axis consecutive

driving

(X axis motor driving)

#X MOVING ADJ. *RUN*

XXX (****)

[]/[] : CV

[]/[] : MOVE

[ENTER] : Exec

[END] : Return

[]/[] : Change adjust

value

[END] : Store adjust value

and end

*Not cap OFF