Specifications

Color Inkjet Printer JV33-130/160

1-4

1-2. Tools required for maintenance work

The tables below show the tools and measuring instruments required for maintenance work.

1-2-1. Tools to be used at disassembly and reassembly

1-2-2. Adjustment tools

Name Remarks

Phillips screwdriver Type 1

Type 2

For M2

For M3 to5 (L=260 or more)

for M3 to 5

Slotted screwdriver Long side 2.5 mm for removing E-rings

Spanner (Box wrench) Width across flats: 5 mm

Width across flats: 5.5 mm

Width across flats: 7 mm

Hexagon wrench 1.5mm for M3 SSWP

2.0mm for M4 SSWP

2.5mm for M3 cap bolts

5.0mm for M6 cap bolts

6.0mm for M8 cap bolts

Spanner Width across flats: 5.0 mm

Width across flats: 5.5 mm for M3 nuts and hexagon stud

Width across flats: 7.0 mm for M4 nuts

Tweezers To prevent the cable from being pulled when disconnecting the connector.

Long-nose pliers

Nippers

Soldering iron, Solder

Scale 150, 500 mm

Loupe About 50x to 60x magnification

Protection glasses

Gloves To keep hands clean, and for safety.

Adhesive agent LOCKTITE242 (for locking screws)

Insulation lock L=150 or less (UL-approved product)

Name Code Remarks

Trimmer adjustment screwdriver For adjustment of trimmers on the power supply PCB.

Tester

Bar type tension gauge 500 g

Ink line airtight tester OPT-J0094