Specifications

- 4.13 -
Effective Plotting Area
The device has an area which cannot perform printing, due to mechanical reasons.
This area is called “ dead space”.
0 mm
Roll
media
110 mm
15 mm 15 mm 15 mm15 mm
Cut sheet
media
Media
feeding
direction
25 mm
65 mm
Effective
printing
area
Effective
printing
area
• Changing the effective printing area...
Initial value of dead space for right and left of media is 15 m each.
The effective plotting area can be changed by changing the dead space.
Dead space is set with [MARGIN] in FUNCTION mode. page4.9
•Max. Printing Width varies by the following conditions. See the basic specifi-
cations for details.
* Ink set
* Resolution
* Variable Data
* Normal Data