Specifications

- 2.25 -
5. Press the [ENTER ] key.
6. Press the [ENTER] key.
7. Press the Jog key [
] or [ ] to enter a correc-
tion value from the output pattern.
• When [ADJUST] is changed to 30, the pattern moves by about 0.1 mm.
Determine the correction value referencing this amount of movement.
8. Press the [ENTER] key.
Register the correction value.
Repeat steps 6 to 8 until normal plotting result is obtained.
9. Press the [END] key three times.
The menu returns to the LOCAL mode.
TYPE. 1
MEDIA COMP. < ent >
TYPE. 1
PRINT START : ent
TYPE. 1
ADJUST = 20
Correction value is too large Correction value is too small
Get between lines
Overlap
TYPE. 1
PRINT START : ent
< LOCAL >
width : 1272 mm