Specifications

- 1.13 -
Types of media that can be used
The types of media that can be used with the device are roll media and cut sheet media.
The types and sizes of media that can be used with the device are explained below.
Types of media that can be used
•Tarpaulin
•FF (Flexible Face)
• PVC
Sizes of media that can be used
Media Size JV3-75SPII JV3-130SPII
Maximum 810 mm 1371 mm
Minimum 210 mm 210 mm
Plotting width
*1
800 mm 1610 mm
Thickness 1.0 mm or less 1.0 mm or less
Roll weight
*2
15 kg or less 25 kg or less
Roll outside diameter Ø 180 mm or less
In case attaching roll holder to the most upper parts, roll outside diamiter is Ø 140 mm
or less.
Roll inside diameter 3 or 2 inches
Plotting surface Faces OUT
Roll end treatment Light-adhesive tape is used to allow the paper to be removed from the core
with ease.
Maximum 810 mm 1371 mm
Minimum 210 mm 210 mm
Plotting width
*1
800 mm 1361 mm
*1
Max. Printing Width varies by the following conditions. See the basic specifications for details.
• Ink set
• Resolution
• Variable Data
• Normal Datathe
*2
Without slack on the roll when it is retained at both ends.
Roll media
Cut sheet
media