Specifications

- 5.16 -
Routine cleaning [ROUTINE CLN]
To prevent clogging while not plotting, ink is ejected from the head at regular intervals.
The head itself must be cleaned also at regular intervals which are set as shown below.
• This function is not performed when the error message relating to ink is
displayed on LCD.
• This function performs only when the plotter is left with displaying the
follwings:
• Key operation is not available while this function performs because it is the
same performance as cleaning.
STEPS:
1. Select the [ROUTINE CLN].
page 5.2
2. Press the [ENTER] key.
3. Press the JOG key [
] or [ ] to select the
interval.
4. Press the [ENTER] key.
[ROUTINE CLN] is displayed.
5. Press the [END] key twice.
The menu returns to the LOCAL mode.
MAINTENANCE
ROUTINE CLN < ent >
ROUTINE CLN
INTERVAL = OFF
SLEEPclean
INTERVAL = 1 h
MAINTENANCE
ROUTINE CLN < ent >
< LOCAL >
width : 1272 mm
< LOCAL >
width : 1272 mm
* REMOTE *
0.00 m
TWICE