Setup guide

– 3.6 –
• The number of absent
ink cartridge is shown.
• Cartridge with
defective IC chip is
displayed.
• The number of the ink
cartridge in which the
ink has run short.
• Ink has run out
• The ink cartridge will
expire soon or has
expired.
• The IC chip missing,
Inferior contact.
• The IC chip of the ink
cartridge cannot be
read normally.
• The type of the loaded
ink cartridge is
different from the
previous one.
•Wrong attaching
position of the ink
cartridge.
1) Check details with guide display.
2) Install the ink cartridge.
3) If the error recurs after the ink
cartridge has been installed.
Conduct sensor tests to find out the
cause of trouble.
Possible causes of the troubles are as
follows.
a) The cartridge presence/absence
sensor has failed.
b) Defective contact or disconnection
of relay cables.
c) Main PCB or IO PCB has failed.
1) Replace the ink cartridge with a new
one.
2) If the error recurs after the ink
cartridge has been replaced, conduct
sensor tests to find out a possible
cause of the trouble.
Possible causes of the troubles are as
follows:
a) The ink end sensor has failed.
b) Defective contact or disconnection
of relay cables.
c) Ink sensor PCB has failed.
d) Main PCB or IO PCB has failed.
1) Replace the ink cartridge with a new
one.
1) Replace the new ink cartridge.
1) Replace the new ink cartridge.
1) Replace the new ink cartridge.
1) Check the type of the loaded ink
cartridge.
1) Attach the ink cartridge(s) correctly.
3-2-2. Ink-related components and other components
Message Description
Corrective measures and
recovering procedures
< LOCAL >
CARTRIDGE K - - - - -
< LOCAL >
NEAR END K - - - - -
< LOCAL >
INK END K - - - - -
< LOCAL >
timeLIMIT KMCYmc
NON-ORIGINAL INK
KMCYmc
WRONG INK IC
KMCYmc
Kind of INK
KMCYmc
Color of INK
KMCYmc