Setup guide

– 5.65 –
[Operation]
1) Select the PARAMETER.
Press the
ENTER
key.
2) Select the “SYSTEM PRM” pressing the
FUNCTION
key.
Press the
ENTER
key.
3) Select a parameter item using the
or
key.
4) Press the
ENTER
key to permit the value
to be changed.
5) Change the value using the
or key.
6) Press the
ENTER
key to store the value.
7) Press the
key to exit from the
function.
FUNCTION
# PARAMETER < ENT >
# PARAMETER
SYSTEN PRM < ent >
# SYSTEM PARAMETER
0 = 0 COMP. X
# SYSTEM PARAMETER
62 = 0 SUPPORT
# SYSTEM PARAMETER
62 = 0 0
# SYSTEM PARAMETER
62 = 0 2
# SYSTEM PARAMETER
62 = 2 SUPPORT
•
•
•