Setup guide

– 5.48 –
7) Press the
key.
The state of the front cover sensor is shown on
the LCD.
ON: The front cover has been opened.
OFF: The front cover has not been closed.
8) Press the
key.
Current status of ink pack sensor is displayed.
The color codes of the cartridges that have run
out of ink are appear.
9) Press the
key.
Current status of ink end sensor is displayed.
The color codes of the cartridges that have run
out of ink are appear.
10) Press the
key.
Current status of power of heater is displayed.
ON: Power on.
OFF: Power off.
Press the
key in repetition to return the layers
of screens one by one.
11) Press the
key to exit from the
function.
Press the
ENTER
key to start the initial
operation.
# SENSOR TEST
FRONT COVER : OFF
# TEST
INK PACK
# TEST
INK END
# TEST
HEATER POW : OFF
# TEST
SENSOR TEST < ent >