Setup guide

– 5.37 –

5-4-2. PARAMETER DRAW

[Function]

Setting state of parameters is plotted.

[Operation]

1) Select the TEST.

Press the

ENTER

key.

2) Select the “PARAMETER DRAW” pressing

the

FUNCTION

key.

Press the

ENTER

key.

3) Select the plot parameter using the

key.

System parameter

Ink parameter 1

Ink parameter 2

Ink parameter 3

Maintenance parameter

Servo parameter

Adjustment parameter

Information parameter

4) Press the

ENTER

key to start plotting.

HEAD ID is issued in the maintenance list in case maintenance mode is released.

FUNCTION

# TEST < ENT >

# TEST

PARAM. DRAW< ent >

# PARAM. DRAW

DRAW : SYSTEM PRM