Setup guide

– 5.35 –
d. Plotting a feed pattern
1) Select “FEED” using the or key and
press the
ENTER
key.
2) Select the resolution using the
or key
and press the
ENTER
key.
Resolution : 360 x 360- N1, 360 x 360- V1
360 x 540-N1, 360 x 540-V1
720 x 720- N2, 720 x 720- V2
1440 x 1440 -V2, 180 x 180- N1
180 x 180- V1
3) Select the print mode using the
or
key and press the
ENTER
key.
Drawing way : BI-D 1,2,3,4,6,8,12,16 pass
UNI-D 1,2,3,4,6,8,12,16 pass
• Some items cannot be selected
depending on the resolution.
4) Select the interval in the Y-direction using the
or key and press the
ENTER
key.
Length setting: 16 dot to 512 dot
5) Select the plotting length in the X and Y-
6) After the completion of the plotting, press the
key in repetition to return the
layers of screens one by one to permit the
conditions to be changed.
# CHK PATTERN
PATTERN : FEED
# CHK PATTERN
DPI : 360X360-N1
# CHK PATTERN
PLOT : UNI–D 1 pass
# CHK PATTERN
BETWEEN : ∗ ∗ ∗ dot