Setup guide

– 5.22 –
5-3-10. WORM WHEEL
[Function]
Perform eccentric correction of worm gears.
< This is not used in the field. >
[Operation]
1) Select the ADJUSTMENT, and then press the
ENTER
key.
2) Select the “WORM WHEEL”, and then press
the
ENTER
key.
3) Press the
key.
FUNCTION
# ADJUST < ENT >
# ADJUST
WORM WHEEL < ent >
#WORM WHEEL
X : S= ∗. ∗ ∗ A= ∗ .∗ ∗