Specifications

- 3.6 -
Cleaning the head sides
As the device is used to plot images, the head sides gradually become stained with ink and
dust.
Open the maintenance cover, and wipe the head sides with a swab.
STEPS:
1. Turn off the power to the device.
Page 2.30
2. Open the maintenance cover and remove three
knobs.
3. Move the head by the hands to the extreme
left.
4. Wipe off ink or dirt the head sides using swab.
5. Return the head with your hand to extreme
right.
6. Attach the maintenance cover.
Fasten three knobs that removed in STEP2.
7. Turn on the power to the device.
page 2.3