Specifications

- 1.13 -
Types of media that can be used
The types of media that can be used with the device are roll media and cut sheet media.
The types and sizes of media that can be used with the device are explained below.
Types of media that can be used
•Tarpaulin
•FF (Flexible Face)
• PVC
Sizes of media that can be used
Media Size JV3-130SPII
Maximum 1371 mm
Minimum 210 mm
Plotting width
*1
1610 mm
Thickness 1.0 mm or less
Roll weight
*2
25 kg or less
Roll outside diameter Ø 180 mm or less
In case attaching roll holder to the most upper parts, roll outside diamiter is Ø 140 mm
or less.
Roll inside diameter 3 or 2 inches
Plotting surface Faces OUT
Roll end treatment Light-adhesive tape is used to allow the paper to be removed from the core
with ease.
Maximum 1371 mm
Minimum 210 mm
Plotting width
*1
1361 mm
*1
In the case of high speed scanning , the maximum drawing range would be
1321 mm.
*2
Without slack on the roll when it is retained at both ends.
Roll media
Cut sheet
media