Specifications

- 6.8 -
Pre THERMISTOR
Print 50
40
o
C
Pre 55
o
C (40)
Print THERMISTOR
Warning message Cause Corrective measure
The thermistor of the
preheater is defective.
The thermistor of the print
heater is defective.
Contact your local distributor
to call for service.
The print heater is discon-
nected.
The preheater is discon-
nected.
Pre 40° 45° C
Print BREAKAGE
Pre BREAKAGE
Print 43° C ( 4 7)
The preheater or print heater
has failed.
The power of the heater is
off.
Turn on the power of the
heater.
If the same error message
appears again on the LCD,
contact your local distributor to
call for service.
Press the [HEATER] key to
display the details of the error.
Check the error.
<LOCAL> ! HEATER
width: xxxxx mm
∗ REMOTE ∗ ! HEATER
TYPE. 1 0.0 0 m
Heater Power OFF