Specifications

- 5.19 -
4. When the display shown on the right appears,
set the cleaning cartridge.
Cleaning fluid is suctioned up.
5. When the display shown on the right appears,
remove the cleaning cartridge.
Suck in air.
6. When the display shown at right appears, set
the cleaning cartridge.
Cleaning fluid is suctioned up.
7. When the display shown on the right appears,
remove the cleaning cartridge.
Cleaning fluid is discharged to the waste ink tank.
When one step have been completed, the
display shown on the right appears.
If you want to wash the head again, press the
[
] key to go to the step 4.
If you want to end the washing procedures,
press the [ ] key to go to the step 8.
8. When all steps have been completed, the
display is shown on the right.
9. Press the [END] key twice, and return the menu
to the FILL UP INK mode.
WASH
SET CLEAN TOOL
WASH
REMOVE TOOL
WASH
SET CLEAN TOOL
TWICE
WASH
REMOVE TOOL
HEAD WASH
E N D < > W A S H
MAINTENANCE
HEAD WASH < ent >
Ink Set
SS2 Sol