Specifications

4-22
Regular maintenance for white ink
White ink is easier precipitate than other inks.
• In case without printing more than two weeks, white ink may cause precipitate in ink cartridge or inside
of the device.
• When the ink is precipitated, nozzle clogging occurs and normal drawing can not be obtained.
• Make sure to perform periodical maintenance to avoid precipitation and to keep white ink good
condition.
1
Select the “WHITE MAINTENANCE MODE” of the maintenance
menu.
(1) Press the key in the local mode.
(2) Select the [MAINTENANCE] by pressing the or key, and press the key.
(3) Select the [WHITE MANT] by pressing the or key.
(4) Press the key.
• [REMOVE CARTRIDGE] is displayed on the screen.
2
Pull out the white ink cartridge form the
ink station.
3
Press the key.
• White ink discharge operation starts.
4
Shake the white ink cartridge up and down about 10 times slowly.
• To avoid the spill of the ink when shaking the ink cartridge, cover the part A on the upper
surface of the cartridge and the part B on the bottom surface of the cartridge with paper
towel, etc. and slowly shake the ink up and down.
• Be sure to perform the following operation at least once a week.
• Use the specified ink cartridge.
• This function is available only when white ink (white) is included in the ink set.
FUNCTION
ENTER
ENTER
EM I SS I ON
PLEASE WA I T
ENTER
Part A
(Insertion hole of the needle)
Part B
(Gap on the bottom surface)
Press firmly with paper towel
and shake slowly.