Specifications

Changing origin
3-3
3
Useful Function
Changing origin with FUNCTION menu
To precisely set the origin of coordinates, set its X- and Y- coordinates from the FUNCTION menu. This
setting value becomes the origin position (0, 0).
1
Press the key in the local
mode.
2
Select the [ORIGIN] by pressing the
or key.
3
Press the key twice.
• X-axis offset value setting screen is displayed.
4
Input value by pressing the
or keys.
• Setting the origin position of X-axis.
• The value in the parentheses indicates the distance from the origin to the maximum
effective area.
5
Press the key.
6
Select the [Y OFFSET] by pressing the
or keys.
7
Press the key.
8
Input value by pressing the
or keys.
• Setting the origin position of Y-axis.
9
Press the key.
10
Press the key twice to finish.
• The set value is not cleared by cutting the power.
FUNCT I ON
VIEW <ENT>
FUNCTION
FUNCT I ON
OR I G I N < ENT >
OR I G I N 5 0 0mm
XOFFS : mm
ENTER
OR I G I N 4 9 0mm
XOFFS : 10mm
OR I G I N
SELCT : X OFFSE
ENTER
OR I G I N
SELCT : Y OFFSE
OR I G I N 6 0 0mm
YOFFS : mm
ENTER
OR I G I N 5 9 0mm
YOFFS : 10mm
OR I G I N
SELCT : X OFFSE
ENTER
END