Specifications

2-7

Setting the media

Basic Operations

On the absorption area

The absorption area of JF-1631 is shown in the following figure. Pressing or key, set the

optimum absorption area for the media to be set.

Size of the media and switch-over of the valve

When using fixed size media, set the suction valve and vacuum as follows:

• When changing the point of origin, please refer to P.3-2 .

Media size

Suction valve Vacuum setting

F1 F2 F3 F4 R1 R2 FRONT REAR

3 ' x 6 ' Board

Open Open Open Open Close Close ON OFF

4 ' x 8 ' Board

Open Open Open Open Open Close ON ON

5 ' x 10 ' Board

Open Open Open Open Open Open ON ON

• When using the media other than the fixed length, open the suction valve corresponding to

the larger area than the size of the media.

FRONT REAR

470

1010

1550

1850

2420

3100

920

1220

1600

▲ Mark

Use as a rough guide

for valve opening and

closing.

Origin

Seal indicating the point of origin

Provided at the 4 corners of the table.