Specifications

1-13

Before Use

Menu mode

This device has three modes. Each mode is described below.

Local Mode

Local mode is a mode in drawing preparation state.

All keys are available.

Receiving of data from the computer is allowed, however, drawing is not executed.

The following operations are allowed in the local mode.

(1) Setting an origin and drawing area by pressing the JOG keys.

(2) Executing “Test drawing” by pressing the key.

(3) Executing “head cleaning” by pressing the key.

(4) Execute setting of each function by pressing the key.

Function Mode

Press the key during the Local Mode to call the Function Mode.

Function settings on drawing method can be set.

Remote Mode

Drawing is conducted according to received data.

Pressing of the key causes the temporal stop of the device.

Press the during the Local Mode to start the Remote Mode.

The UV lamp is lit when it has not been ON.

TEST

CLEANING

FUNCTION

REMOTE