Specifications

5-7
Troubles for which error messages are given on the LCD
5
In Case of Trouble
Error message Cause Corrective measure
The time for cleaning the
capping has come.
• Conduct cap cleaning with reference
to P.4-26.
Occurrence of a cartridge error.
• Execute an action for the error on ink
cartridge displayed in the local mode.
Wiper tank is full.
• Discard waste ink pooled in the tank
with reference to P.4-10 .
Water volume is shortage.
• Make sure to check the water volume.
( P.4-30)
Abnormal water tank
temperature.
• Turn off the power to the device an
turn it on after a while.
• If the same error message appears
again on the LCD, contact your local
distributor to call for service.
Water pump timeout.
Head temperature is abnormal
condition.
Over heating of a UV lamp in the
right side of the unit.
Over heating of a UV lamp in the
left side of the unit.
Occurrence of interlock on a UV
lamp in the right side of the unit.
• Clean the UV lamp filter ( P.4-36 ).
Occurrence of interlock on a UV
lamp in the left side of the unit.
An error occurs on the interface
between the I/F board and the
control board.
• Perform a proper operation.
Head is not selected.
• Select a head to be cleaned or filled.
The type of the loaded ink
cartridge is different from the
previous one.
• Check the type of the loaded ink
cartridge.
Remaining ink in the ink
cartridge is short.
• Replace the ink cartridge with new
one. ( P.4-4)
Settings for functions have been
tried to be changed though there
remains received data that has
not yet been printed.
• Print all pieces of received data or
execute the data clear function. Then,
change the settings.
( P.2-12 , P.3-9)
ERROR607
CAP CL EAN I NG
ERROR608
CARTR I GE : MCYKKYCM
ERROR60B
WI PER TANK FULL
ERROR705
WA T E R L A C K
ERROR705
WA T E R T A NK T EM P
ERROR705
WATER TANK ROUTE
ERROR705
WA T E R H E AD T EMP
ERROR706
UV1 OVER HEAT
ERROR706
UV2 OVER HEAT
ERROR706
UV1 I NTE RLOCK
ERROR706
UV2 I NTE RLOCK
ERROR901
OPERAT I ON
ERROR901
NO HEAD S E L ECT
ERROR901
Ink Type
ERROR901
REMAIN INK
ERROR902
DATA REMAIN