Specifications

5-4
Troubles for which error messages are given on the LCD
If something is wrong with the device, the buzzer sounds and a corresponding error message is given on
the LCD. Take an appropriate corrective measure in accordance with the message.
Errors accompanied by warnings
Warning message Cause Corrective measure
The ink cartridge is not attached
to the ink station.
• Attach the ink cartridge(s) correspond-
ing with the color shown on the dis-
play.
( P.2-4)
The amount of ink remaining in
the ink cartridge is insufficient.
• Replace an ink cartridge of the
displayed head with new one ahead of
time.
( P.4-4)
The ink cartridge has run out of
ink.
• Replace the ink cartridge of which
color is shown on the LCD with a new
one.
( P.4-4)
An error on an inserted ink
cartridge
• Remove an ink cartridge of the
displayed head and insert it again. If
the error is still displayed after this
operation, call the dealer or our
branch for the service.
The ink will expire soon or has
expired.
• Replace the ink cartridge of which
color is shown on the LCD with a new
one.
( P.4-4)
The type of the loaded ink
cartridge is different from the
previous one.
• Check the type of the loaded ink
cartridge.
The color of the loaded ink
cartridge is different from the
previous one.
• Check the color of the loaded ink
cartridge.
The loaded ink cartridge is not
MIMAKI genuine.
• Use the ink specified by MIMAKI.
The IC chip of the ink cartridge
cannot be read normally.
• Remove an ink cartridge of the
displayed head and insert it again. If
the error is still displayed after this
operation, call the dealer or our
branch for the service.
<LOCAL>
NO CARTRDG : MCYKKYCM
<LOCAL>
INK NEAREND:MCYKKYCM
<LOCAL>
INK END :MCYKKYCM
<LOCAL>
CARTR I GE : MCYKKYCM
<LOCAL>
Exp i ra t i on :MCYKKYCM
<LOCAL>
INK TYPE :MCYKKYCM
<LOCAL>
Co l o r o f I NK : MCYKKYCM
<LOCAL>
NON - OR I GN L : MCYKKYCM
<LOCAL>
WRNG I NK I C : MC YKK YCM