Specifications

4-41
4
Daily Maintenance
Checking UV ink curing level
As the UV lamp is deteriorated, the ink curing level may be lowered.
Check the UV ink curing level and adjust the UV lamp light intensity, if necessary.
1
Set media for drawing patterning on the table.
• Turn the vacuum switch ON. After that, set the drawing origin.
2
Make sure that the local mode is
displayed.
3
Press the key.
4
Select [HARDEN CHK] by pressing the
or key.
5
Press the key.
6
Select resolution by pressing the
or key.
• Setting value : 300 x 300 dpi, 300 x 600 dpi, 600 x 600 dpi, 600 x 1200 dpi, 900 x 600 dpi,
900 x 1200 dpi, 1200 x 1200 dpi
7
Press the key.
8
Select drawing quality by pressing the
or key.
• Setting value : STANDRD, FINE, FAST
9
Press the key.
10
Select the scanning direction pressing
or keys.
• Setting value：BI-D , UNI-D
TEST DRAW
NOZ Z L E CHK <ENT >
TEST
TEST DRAW
HARDEN CHK <ENT>
HARDEN CHECK
DPI : 300X300
ENTER
HARDEN CHECK
DPI : 1200X1200
HARDEN CHECK
QAL I TY : STANDRD
ENTER
HARDEN CHECK
QA L I TY : F I NE
HARDEN CHECK
SCAN D I R : B I - D
ENTER
HARDEN CHECK
SCAN D I R : UN I - D