Specifications

4-36
Cleaning of UV lamp filter
To use for a long time, clean the UV lamp filter periodically (once around two weeks).
1
Put out the UV lamps and switch OFF the power.
2
Turn the main power switch located on
the backside of the main unit off.
• Be sure to confirm that the UV lamp lights out
before the main power is shut off.
3
Remove the front right cover and the front left cover.
• When cleaning, be sure to wear the supplied goggles and gloves since you may get ink in your
eyes.
• Wear gloves not to injure your hands at cleaning of the UV lamp filter.
• The replacement of the UV lamp filter is required when an alarm relating the UV lamp repeats
frequently even though the filter is cleaned periodically. Contact a shop or a sales office for the
replacement.
• Contact a shop or a sales office when a screw is dropped in cleaning of the filter.
Articles required for
cleaning
• Alcohol • Gloves
• Gloves • Paper towel
Press the lower part (o) to
switch OFF the power.