Instruction manual

- 5.12 -
Set up the ink of different type [Ink Change]
Replace the filled ink with the other ink of different type.
Outfit :
• Washing liquid cartridge (Type: SPC-0422 or SPC-0188S)
• New ink cartridges
• Use the new cartridges.
• If using the ink cartridges with small amount, the ink may run out while
filling ink.
• Only color ink allows to be replaced. Not for any discharge liquid.
STEPS:
1. Make sure that the FUNCTION mode is dis-
played.
2. Press the [ ] and [ ] keys to select the [MAIN-
TENANCE].
3. Press the [ENTER] key.
4. Press the XY [ ] or [ ] keys to select [Ink
Change] .
5. Press the [ENTER] key.
The waiting screen to replace the ink is dis-
played.
6. The ink exchange control function starts oper-
ating by the [ENTER] key.
It cleans up the ink drains
7. Remove the exchanging a cartridge.
8. Ink is automatically ejected from the ink drains.
FUNCTION
SETUP < ENT >
FUNCTION
MAINTENANCE < ENT >
MAINTENANCE
List < ent >
MAINTENANCE
Ink Change < ent >
Ink Change
Start :ent
Remove Cartridge
1 2 5 6 3 4 7 8 - - - - - - - -
Remove Cartridge
1 2 5 6 3 4 7 8 - - - - - - - -
Washing 1/5
00: ∗∗ : ∗∗