Instruction manual

- 5.9 -
When the message [Replace Wiper] is displayed [Station]-
[Wiper Exchng]
The wipers are consumable parts. When the following message is displayed, replace the wipers with
new ones.
• Do not press the [ENTER] key other than the case of replacing wipers.
The number of wiper operations that is counted in the machine will be
reset.
Do not select [Wiper Exchng] unless the wiper is to be really changed.
STEPS:
1. Press the [ ] or [ ] keys to select [Station].
2. Press the [ENTER] key.
3. Press the [
] or [ ] keys to select [Wiper
Excng].
4. Press the [ENTER] key.
The wiper moves toward you and the carriage moves away
from the station.
5 Open the station cover.
6. Holding the projections at both ends, draw out
the wiper.
Use the gloves that are supplied with the separately-available
clean wiper to protect your hands from stains.
Wiper
Replace Wiper
MAINTENANCE
Station < ent >
Station Maint
Sel : Carriage Out
Station Maint
Sel : Wiper Exchng
Wiper Exchange
Completed : ent