Instruction manual

- 5.7 -
When medium thickness is changed [Print Adjust]
6. Press the [ENTER] key.
7. Repeat STEPS 5 and 6 to correct the dot posi-
tions on Patterns 2 to 7.
Select the correct dot positions on each of the patterns.
Enter the dot position correction value on Patterns 1 to 7 and
then terminate dot position correction.
8. Press the [END] key to complete [Print Adjust].
9. Press the [END] key twice, and the menu
returns to the LOCAL mode.
Print Adjust
Pattern2 = 0.0
MAINTENANCE
Print Adjust < ent >
<< LOCAL >>
X =1010 Y = 1860
Print Adjust
Pattern3 = 0.0
Print Adjust
Pattern4 = 0.0
Print Adjust
Pattern5 = 0.0
Print Adjust
Pattern6 = 0.0
Print Adjust
Pattern7 = 0.0
Print Adjust
Pattern : ent