Instruction manual

- 5.4 -
Printing setup conditions [LIST]
This function lists the current settings of the machine.
This is useful in carrying out maintenance of the machine.
1. SET UP : Indicates a value that is specified with the FUNCTION.
2. PRINT adjust : Indicates a correction value for dot position.
3. REPLACE COUNTER : Indicates the number of times the ink cartridges are replaced.
4. VERSION : Indicates the version of the firmware and memory capacity of the machine.
5. PARAMETER : To be used by customer engineer for maintenance.
•When the [LIST] function is used to print data commands on paper,
use 297mm x 210mm or larger size with the long side set horizontally.