Instruction manual

- 5.3 -
Maintenance of the machine
Maintenance setup functions
The following describes the overview of and settings for each function.
Name function
List Printing the set condition of the machine.
Data Dump Printing data commands received from the computer, in HEX code.
Print Adjust Adjust the dot position according to the head height, high/low.
Station Clean the inside of the station and replace the wiper.
( Wiper Exchng, Carriage Out, Nozzle Clean, Drain Wash, Storage Wash )
Ink Filling This is not normally used.
Perform it when nozzle clogging is still not solved.
In addition, when Nozzle cleaning or Storage Wash is performed, this may cause
color mixture.
Perform it when ejecting mixed color ink.
Ink Change Changed ink different from the one currently in use.
Routine Ctrl To set Routine Flushing or Routine Cleaning on/off and interval.
Head To Use When making printing, using only headline which set this function.
page 5.4
page 5.5
page 5.6
page 5.8
page 5.11
page 5.12
page 5.16
page 5.18