Instruction manual

- 5.1 -
CHAPTER 5
Maintenance
In order to keep the machine in good operating condition, it is necessary to carry out
maintenance of the machine periodically.
This chapter introduces special features for correcting poor printing quality and
replacing the wipers.
Table of contents
Maintenance of the machine ................................................................ 5.2
Printing setup conditions [LIST] ........................................................... 5.4
Printing HEX CODE [DATA DUMP] ...................................................... 5.5
When medium thickness is changed [Print Adjust] .............................. 5.6
Cleaning the station interior [Station]-[Carriage Out] ........................... 5.8
When the message [Replace Wiper] is displayed [Station]-[Wiper Exchng] ..... 5.9
Fill up the ink [Ink Filling] ................................................................... 5.11
Set up the ink of different type [Ink Change] ...................................... 5.12
Displaying the firmware version [INFORMATION] ............................. 5.15
Execute the flushing and cleaning regularly [Routine Control] .......... 5.16
Specifying the print head line [Use Head] .......................................... 5.18