Instruction manual

- 4.7 -
Setup functions
Feed Correct
When the machine is not print a clear image (e.g., unwanted stripes may appear on the image),
to correct the work feed rate.
Auto Clean
The head is cleaned automatically. Perform cleaning for each print to prevent printing failures.
[ON] : The head is cleaned automatically.
[OFF] : The head is not cleaned automatically.
Setup Reset
This function resets the current printing conditions to the factory-set printing conditions.
Execute this function for each of the types of set printing conditions.
[ENTER] : All setup is reset.
[END] : End without reset.