Instruction manual

- 4.6 -
Priority
Specifies whether the values set on the machine (print) are given priority or the values set on the
computer (host) are enabled as for the following five functions.
• Print Mode
•Overprint
• Drying Time
• Refresh
• Feed Correct
[HOST] : The plotting operation is performed with priority given to the printing
conditions set on the computer.
[PLOT] : The printing operation is performed with priority given to the printing
conditions set on the machine.
Refresh
Solidification of ink can be prevented by refreshing the head during printing.
If this function is executed in a dusty place or dry place, ink in the head will be likely to solidify.
A larger level results in more number of refreshes.
Number of refreshes : Level 0 – 3
mm/ inch
Set a unit of set values displayed.
When the machine is shipped from the factory, the unit of display is set to “mm” (millimeter).
[mm] : Numerics are expressed in millimeters.
[inch] : Numerics are expressed in inches.
[Offset] : -100 – 100