Instruction manual

- iv -
CHAPTER 5 Maintenance
Maintenance of the machine ................................................................ 5.2
Setting the maintenance function................................................ 5.2
Maintenance setup functions ...................................................... 5.3
Printing setup conditions [LIST] ........................................................... 5.4
Printing HEX CODE [DATA DUMP] ...................................................... 5.5
When medium thickness is changed [Print Adjust] .............................. 5.6
Cleaning the station interior [Station]-[Carriage Out] ........................... 5.8
When the message [Replace Wiper] is displayed [Station]-[Wiper Exchng] ..... 5.9
Fill up the ink [Ink Filling] ................................................................... 5.11
Set up the ink of different type [Ink Change] ...................................... 5.12
Displaying the firmware version [INFORMATION] ............................. 5.15
Execute the flushing and cleaning regularly [Routine Control] .......... 5.16
Specifying the print head line [Use Head] .......................................... 5.18
CHAPTER 6 When Abnormal Conditions Are Encountered
Abnormal conditions where no error massage appears ...................... 6.2
The machine cannot be energized.............................................. 6.2
The machine cannot perform printing ......................................... 6.2
If image quality declines ....................................................................... 6.3
While lines/thin spots are obvious or dark stripes occur (In the direc-
tion of travel of the head) ............................................................ 6.3
Characters fluctuate doubly or triply into paper feed .................. 6.3
Displacement is observed between outward and inward printing 6.3
The respective color ink injected by the respective color heads do
not properly overlap .................................................................... 6.3
Large ink drop on medium .......................................................... 6.3
Become lighter during the printing and then printing without ink 6.3
When printing trouble occurs in ........................................................... 6.4
Unable to discharge .................................................................... 6.4
Impaired discharge function ........................................................ 6.4
Some strip streaks occur on the image with narrow print width .. 6.4
Problems where error messages are given on the LCD ...................... 6.5
Errors accompanied by warnings................................................ 6.5
Error messages........................................................................... 6.8