Instruction manual
- 3.19 -
When not in use the machine over the long term [Storage Wash]
12. Close the station cover, and press the [ENTER]
key.
13. Press the JOG [
] or [ ] keys, select the time
to leave. (1-99 minutes: 1 min unit)
Normally set 1 min.
14. Press the [ENTER] key.
The initial operation is performed.
Remaining time is displayed.
After remaining time is over, execute cleaning.
Remaining cleaning time is displayed.
After cleaning the nozzles, the Y-bar moves to the top. The
wiper moves toward you and the carriage moves away from
the station.
15. Open the station cover and clean the both
sides of the wiper.
Use a cotton swab soaked with the cleaning
liquid (A29) to clean off ink blots on wiper.
• If dirt of curl is serious, replace the wiper with a
new one. At the time of replacement, be sure to
terminate the machine operation and follow the
wiper replacement procedure.
Clean the wiper and press the [ENTER] key.
Initialize
Please Wait
Fill Up Washings
Completed : ent
Nozzle Cleaning
Wait Timer = 1 min
Storage Wash
00 : ∗ ∗ : ∗ ∗
Cleaning
00 : ∗ ∗ : ∗ ∗
Wiper Cleaning
Completed : ent