Instruction manual

- 3.13 -
Replacing the flushing tray ink absorber
7. Remove the F-cover upward from the flushing
tray.
8. Remove the ink absorber.
9. Place a new ink absorber (supplied) on the
tray.
Place the ink absorber (as folded) at the center.
• Make certain the ink absorber is placed flat and
touching the tray. Otherwise, it may interfere with
the head nozzles.
10. Place the F-cover from above.
• Place the F-cover all the way down. A floating
cover may cause trouble.
11. Close the station cover, then press the [EN-
TER] key.
The initial operation is performed.
12. Return to the LOCAL mode.
<< LOCAL >>
X =1010 Y = 1860
Ink absorber
Carriage Out
Completed : ent
F-cover upward