Instruction manual

- 3.12 -
Replacing the flushing tray ink absorber
Replace the ink absorber in the flushing tray if it appears to be clogged. Clogged ink absorber may
cause ink mists and smeared head nozzles.
• Check the ink absorber for clogging at the end the day’s operation.
Cleaning Tool :
• Ink absorber (Order No. M-3 )
STEPS:
1. Press the [FUNCTION] key.
2. Press the XY [ ] or [ ] keys to select
[MAINTENANCE].
Press the [ENTER] key.
3. Press the XY [ ] or [ ] keys to select
[Station].
4. Press the [ENTER] key.
5. Press the [ENTER] key.
The table moves away from you and the Y-bar moves
upward. The wiper moves toward you and the carriage
moves away from the station.
6. Open the station cover.
MAINTENANCE
List < ent >
MAINTENANCE
Station < ent >
Station Maint
Sel : Carriage Out
FUNCTION
SETUP < ENT >
FUNCTION
MAINTENANCE < ENT >
Carriage Out
Completed :ent