Instruction manual

- 3.10 -
7. Open the station cover and clean the both
sides of the wiper.
Use a cotton swab soaked with the cleaning
liquid (A29) to clean off ink blots on wiper.
• If dirt of curl is serious, replace the wiper with a
new one. At the time of replacement, be sure to
terminate the machine operation and follow the
wiper replacement procedure.
Clean the wiper and press the [ENTER] key.
8. Fill the cap with the cleaning liquid (A29) using
a syringe.
Close the station cover, and press the [ENTER]
key.
9. Press the XY [ ] or [ ] keys, select the time to
leave. (1-99 minutes: 1 min unit)
Normally set 1 min.
Wiper Cleaning
Completed : ent
Fill Up Washings
Completed : ent
Nozzle Cleaning
Wait Timer = 1 min
Fill Up Washings
Completed : ent