Instruction manual

- 3.8 -
8. Wipe off the ink adhering to the wiper cleaner
with cotton swab.
• Full attention should be paid to clean the wiper
due to the sharp edges of the wiper cleaner.
9. Wipe off ink or dirt adhered to the rubber of the
cap and the ceiling of the wiper cover using
cotton swab.
• Clean the area at the end of the day’s operation.
10. Close the station cover, then press the [EN-
TER] key.
Execute the initial operation.
11. Return to the LOCAL mode.
Initialize
Please Wait
<< LOCAL >>
X =1010 Y = 1860
Carriage Out
Completed : ent