Instruction manual

- 3.7 -
Cleaning the wiper cap and wiper cleaner
3. Press the [ENTER] key.
4. Press the XY [ ] or [ ] keys to select [Station].
5. Press the [ENTER] key.
The table moves away from you and the Y-bar moves
upward. The wiper moves toward you and the carriage
moves away from the station.
6. Open the station cover and clean the both
sides of the wiper.
Use a cotton swab soaked with the cleaning
liquid (A29) to clean off ink blots on wiper.
• If dirt of curl is serious, replace the wiper with a
new one. At the time of replacement, be sure to
terminate the machine operation and follow the
wiper replacement procedure.
7. Clean the wiper guide shaft using a cotton
swab of cloth.
If dirt is hard to remove, use a cotton swab of cloth damp-
ened with water.
• Extremely dirty wiper guide shaft may cause
operationed failure of the wiper, resulting in error
display.
MAINTENANCE
List < ent >
MAINTENANCE
Station < ent >
Station Maint
Sel : Carriage Out
Carriage Out
Completed : ent