Instruction manual

- 3.6 -
Cleaning Tools :
• Cleaning liquid (A29)
• Cotton swabs
STEPS:
1. Press the [FUNCTION] key.
2. Press the XY [
] or [ ] keys to select [MAINTE-
NANCE].
Cleaning the wiper cap and wiper cleaner
The wiper cap prevents clogging of the head nozzle caused by dried nozzle.
The wiper wipes out ink adhered to the head nozzle.
As the machine is used to print images, the wipers and ink caps gradually become stained with ink
and dust. Use the cotton swabs to clean the wiper.
Clean the wiper cap and the wiper cleaner periodically so as to keep the machine in good operation
condition.
• Clean the wiper at the end of the day’s operation.
•Remove dust from the wiper before starting head cleaning. A dusty
wiper may damage the head and cause defective printing.
•Clean the two wipers at a time.
• Do not move the carriage out of the capping station by hand.
• Do not touch rubber of the new wiper as this may cause clogged
nozzles.
•Once the replacement of the wiper and the cleaning of the caps have
been completed, immediately press the [ENTER] key to allow the car-
riage to return to the capping station. If the carriage is left in the afore-
mentioned state for an extended period of time, the nozzles can be
clogged.
Rubber surface
Capping station side
FUNCTION
SETUP < ENT >
FUNCTION
MAINTENANCE < ENT >