Instruction manual

- 3.2 -
Routine maintenance
Be sure to conduct maintenance works for the machine when necessary or periodically so as to use
the device for a long time while keeping its printing accuracy.
When the machine is left unused for a long period of time
• Be sure to turn off the power of machine. ( page 2.24)
•Remove the work which setting on the table.
Precautions during cleaning
• Never disassemble the machine. Disassembling the machine can
result in electric shock hazards and breakage of the machine.
•To prevent electric shock hazard and damage to the machine, do not
allow moisture to get inside.
•Turn off power and detach power cable before doing any maintenance.
•Benzine, thinner and chemical agents containing abrasives.
Such materials can deteriorate or deform the surface of the cover.
• Do not apply lubricating oil or the like inside the machine. Such mate-
rials can cause the printer mechanism to fail.
• Especially when printing to untreated fabric without preparation by TP
ink, it may cause adherence of cotton waste, dirt, and dust around the
nozzle or the station cap. With some dust around the nozzle and the
wiper, it may cause some trouble on cleaning. Clean the head nozzle,
station cap, and wiper every time when the operation is terminated.