Instruction manual

- 2.24 -
Turning the power off
To turn the power off, check first whether there is data in the machine that remains to be printed.
Also make sure that the head rests at the capping station.
• If the power is turned off while the machine is engaged in printing, the head
may fail to be retracted in the capping station. If the head is left without
capped for an extended period of time, the nozzle will be clogged with dust.
If the power to the machine is turned off without the head capped, return on
the power to the machine.
•When turning off the power, be sure to fill up some head washing liquid in the
discharge head, and then turn off the power.
1. Turn off the power to the computer which is
connected to the machine.
2. Turn off the power to the machine.
Press the power switch to [ O ].