Instruction manual

- 2.16 -
STEPS:
1. The machine enters the LOCAL mode.
2. Press the [FUNCTION] key.
3. Press the [ENTER] key.
4. Press the XY [
] or [ ] keys to select a type.
5. Press the [ENTER ] key.
6. Press the XY [
] or [ ] keys to select [Feed
Comp.].
7. Press the [ENTER ] key.
8. Press the XY [
] or [ ] keys to enter the print-
ing width.
9. Press the [ENTER ] key.
Output the pattern.
10. Check the patterns.
Enter a correction value from the output pat-
tern.
• When [ADJUST] is changed to 30, the pattern
moves by about 0.1 mm. Determine the
correction value referencing this amount of
movement.
11. Press the [ENTER ] key.
Register the correction value.
Repeat steps 8 to 11 until normal printing result is obtained.
12. Press the [END] key three times, and the menu
returns to the LOCAL mode.
<< LOCAL >>
X =1010 Y = 1860
<< LOCAL >>
X =1010 Y = 1860
FUNCTION
SELECT : TYPE1
TYPE1
Print Mode < ent >
TYPE1
Media Comp. < ent >
TYPE1
Print : Y = 100
∗ ∗ Printing ∗ ∗
Please Wait
TYPE1
Adjust = 0
TYPE1
Print : Y = 100
<< LOCAL >>
X =1010 Y = 1860