Instruction manual

- 2.14 -
11. Press the [ENTER] key.
12. Press the XY [ ] or [ ] keys to select the type
of cleaning.
Normal : Select this if any line is bent.
(When selecting the Pigment ink for textile
[T Pig], this function is invalid.)
Strong : When printing trouble is not solved even with
Normal cleaning.
13. Press the [ENTER] key.
It displays the remaining run-time.
14. The machine revert the LOCAL mode.
15. Change the work, or establish the new origin.
16. Repeat steps 2 and 3, and check the result of
the test printing.
Repeat STEPS 2 to 13 until normal printing result is ob-
tained.
••
••
• Replace the wiper and the ink cap if inferior printing does not improve after
cleaning operations. ( page 3.6)
••
••
• In case the TPig ink and dye ink are mixed, the inferior print image may not be
improved in the cleaning, if the TPig ink is set at the front side of the carriage.
Reset the TPig ink at the back side of the carriage, perform the cleaning
operation again.
Cleaning
00: ∗ ∗ : ∗ ∗
<< LOCAL >>
X =1010 Y = 1860
Cleaning
Type : Normal
Normal / Strong