Instruction manual

- 2.6 -
Station cover
Opening/closing the station cover
•Keep the station cover closed during printing operation. Opening the station
cover during printing interrupts image printing and disables continuous
processing.
If you open the station cover during printing, the carriage will stop for safety, resulting in abortion of
printing. In this case, re-start the machine and computer following the procedure described below.
STEPS:
1. When opening the station cover during print-
ing, the message shown on the right will be
displayed.
Stop the printing.
2. Stop the data transmission from the computer.
3. Close the station cover.
4. Press the [ENTER] key.
5. The carriage will start to move.
The carriage will carry out a series of performance same as
that taken after turning on the power to the machine.
( page 2.3)
Check Stop SW or
Station Cover
PRESS < ENT > KEY
Please Wait