Instruction manual

- 2.4 -
Filling of discharge liquid at the time of starting works
If the discharge liquid in this machine has used in the long period, it may cause the decrease in the
print head life. In order to prevent the shortening of the life of the head for discharge liquid, the
discharge liquid contained is replaced by washing liquid when it is not used for an extended period
of time. At the time of starting works, the washing liquid filled in the head for discharge liquid is to
be drained and the discharge liquid is filled in.
STEPS:
1. At the LOCAL state, press the
[FUNCTION] key 4 times.
2. Press the [ENTER] key.
3. Use up/down key to select
[Discharge].
4. Press the [ENTER] key.
5. Open the station cover.
6. Turn the all valves to [DCG].
7. Close the station cover.
8. Press the [ENTER] key.
9. Fill up the discharge liquid after
initializing this machine.
10. It indicates the remaining
run-time.
FUNCTION
DCG/WASH SW <ENT>
DCG/WASH SWITCH
Fill : Discharge
Initialize
Please Wait
Filling
00:00:00
SW Valve To [DCG]
Press [ENT] key